The Telekinetic Enhancer is a valuable tool that will allow you to develop your telekinetic abilities by giving you a visible indication of your progress. Lt is a highly sensitive device that will react to the minute energy fields around the human body. // To assemble the Telekinetic Enhancer remove the rotor and pin from the box and insert the pin up through the hole in the inside center of the cover, so that the point of the needle is going straight up through the Pewter base. Close the box Place the rotor on the needle so the indentation in the rotor rests on the point of the needle. The rotor should be able to spin freely and easily .Make sure that there are no drafts in the room that might move the rotor. Whenever you are practicing with this device, be careful not to breathe on the rotor or it may move from the heated air produced by your lungs. // Once you start developing your telekinetic abilities and you use the device you will be convinced that the movement of the rotor is not easily explained by science. The rotor does not move by heat radiation from your hands or by air currents. It is not magnetism either because the rotor is made of aluminum. // Step 1-The easiest way to learn to move the rotor is by cupping either hand around the rotor in a half circle and concentrate on turning it in the direction your fingers are pointing. The rotor should turn clockwise with your left hand and counter clockwise with your right hand. While using this device you must be relaxed and you should not be resting your elbows. Do not proceed until you have completely mastered this technique.