OPERATION - SPINDLE DIRECTION - FWD

OPERATION - SPINDLE DIRECTION - FWD / N / REV
The spindle direction should always be selected BEFORE operating the motor start/stop switch (H). The spindle direction switch (I) has 3 positions :-
FWD = Clockwise rotation as viewed from above.
N = Neutral or Off.
REV = Anti– Clockwise rotation as viewed from above.
When switching from FWD to REV or REV to FWD always stop the motor first then change the direction before re-starting the motor.
Failure to follow the above procedure could result in damage to the motor or switchgear.

結果 (繁體中文) 1:

操作-主軸方向-FWD / N / 轉速在操作電機啟停開關 (H) 之前，應該始終選擇主軸方向。主軸方向開關 (I) 有 3 個職位:-FWD = 順時針旋轉，從上面看。N = 中性或關閉。馮活 = 反 — — 順時針旋轉，從上面看。從 FWD 轉速或轉速到 FWD 切換時總是首先停止馬達，然後更改之前重新起動電動機方向。未能按上述步驟可能導致損壞電機或開關。

結果 (繁體中文) 2:

操作-主軸旋轉方向- FWD / N / REV
主軸方向應始終在操作前電動機的啟動選擇/停止開關（H）。主軸方向開關（我）有3個位置： -
。FWD =從上面觀察順時針旋轉
。N =中性或關
。從上面觀察REV =逆時針旋轉
時從FWD切換到轉或反轉來FWD隨時停止電機第一，然後重新啟動電機之前更改方向。
未能遵循上述程序可能會導致電機或開關損壞。

結果 (繁體中文) 3:

操作主軸方向前進/ N /轉在電機啟動/停止開關（h）之前，應選擇主軸方向。主軸方向開關（I）有3個位置：—FWD =順時針旋轉，從上面看。中性或關閉。從上面看的逆時針旋轉。當開關從FWD的轉速或轉速FWD總是停止電機後改變方向之前重新啟動電動機。未能按照上述程式可能會導致損壞電機或開關設備。