Make sure hoses are disconnected fr

Make sure hoses are disconnected from the chainsaw and inspect the following items:Inspect the saw chain. The chain tension should be set per Fig. 3. If the tension is too tight, the saw will wear excessively. If the tension is too loose, the chain couldjump the track. Follow the settings as described in Fig. 3.Set the automatic oiler as described in Fig. 2. If set properly, a fine mist should show at the tip of the chain. Too much fluid will drain the reservoir of oil. Follow the .Inspect the chain for damage. The saw will not function properly with a worn or damagedchain. Look for bending, wear, or any damage to the chain assembly.Damaged chain assemblies could cause pinching or kickback, resulting in serious injuryto the operator.Set the Hand Stop approximately 36” from the handle (shown as item 4 on page 15.)This should be a comfortable position for the average person.

結果 (日文) 1:

確かにホースがチェーンソーでメイクから切断され、次の項目で点検：
張力でSETがタイトによる過度のSAWは、Ifでテンションが緩すぎる着用していただきます」TOOされている場合は...ごとにしなければならない図3のカテナのalberghieraテンションでSAWのカテナのalberghieraを点検し、。カテナalberghieraでできた
トラックにジャンプします。次のように図3に記載されている設定で

、図3に説明した自動オイラーに設定。2.適切であれば多くのウィルドレンことによって、流体のカテナalberghiera。すぎるの先端にショーでSET、A細かい霧万一AT石油の貯水池。でフォロー。

損害についてカテナのalberghieraで点検します。SAWで意志によって磨耗または損傷して正常に機能しない
カテナのalberghiera。曲げを探し、ウェア、またはアセンブリalberghieraカテナでの損傷。

損傷カテナをアセンブリalberghiera原因はピンチやキックバック、その結果である可能性がありで重傷
オペレータにまで。

約36（図示ページ項目15. A ON AS。4）ハンドルからストップザ・ハンドSET」
万一のためのこの位置は、快適なザ・平均的な人BE。

結果 (日文) 2:

Make sure hoses are disconnected from the chainsaw and inspect the following items:
インスペック・ザ・チャウ・チャイン テ・チョン・テンシオン・ショルド・ベ・セット・パー・フィグ 3. If the tension is too tight, the saw will wear excessively. If the tension is too loose, the chain could
ジャンプ・テク. Follow the settings as described in Fig. 3.

Set the automatic oiler as described in Fig. 2. If set properly, a fine mist should show the tip of the chain. Too much fluid will drain the reservoir of oil. Follow the .

Inspect the chain for damage. the saw will not function properly with a worn or damaged
チャイン Look for bending, wear, any damage to the chain assembly.

Damaged chain assemblies could cause pinching または kickback, resulting in serious injury
オペラートを呼び出します。

Set the Hand Stop approximately 36" from the handle (shown as item 4 on page 15.)
This should be a comfortable position for the average person.

結果 (日文) 3:

Make sure hoses are disconnected from the chainsaw and inspect the follwing items:
Inspect the saw chain.The chain tension shound be set per Fig.3.If the tension is too tight，the saw will wear excessively.If the tension is too loose，the chain could
jump the trak.Follow the settings as described in Fig.3.
Set the atomatic off as described in Fig.2.If set properly，a fine mist shoud showt the tip of the chain.Too much flution will drain the rerrvoir of oil.Followthe.
Inspect the chain for damage.The saw will not function properly with a worln or damaged
chain.Look for bending，wear，or any damage to the chain asems bly.
Damaged chain assieblies could cause pinching or kickback、reulting in serious injry
to the operator.
Set the Hand Stopアプリ36」from the handle(shown as item 4 on page 15.)
This shoud be a compfortable position for the average person.