 Check the front rip cord housing

 Check the front rip cord housing tacking is in place and the color of the tape, lacing and tying is white. Check that the rip cord handle and rip cord cable is stowed in the pocket and is not routed through the chest strap. Ensure a large portion of rip cord handle is seated in the pocket. Ensure the swage ball is located at the end of the rip cord cable and is free from burrs, sharp edges, and cracks. After inspection, ensure that the swage ball is stowed in the rip cord pocket. (See figure 10-15.)

結果 (繁體中文) 1:

檢查前拉索殼體黏合就位和帶，系帶的顏色和捆紮為白色。檢查拉索手柄和撕裂繩線在口袋裡收起，並通過胸帶不會被路由。確保拉索手柄的大部分在袋就位。確保型鍛球位於拉索電纜的端部，距離毛刺，尖銳的邊緣，和無裂縫。經過檢查，確保模鍛球被撕裂索口袋安放。（見圖10-15）。

結果 (繁體中文) 2:

• 檢查前裂口外殼是否粘接到位，膠帶、綁帶和綁帶的顏色為白色。檢查翻線手柄和翻線電纜是否存放在口袋中，且未通過胸帶佈線。確保大部分翻線手柄都放在口袋中。確保刀球位於裂口電纜的末端，並且沒有毛刺、鋒利邊緣和裂紋。檢查後，確保將紙條球存放在裂口口袋中。（參見圖 10-15。

結果 (繁體中文) 3:

檢查前撕裂線外殼的固定是否到位，膠帶、系帶和系帶的顏色是否為白色。檢查撕裂繩索手柄和撕裂繩索是否收納在口袋中，且未穿過胸帶。確保大部分撕裂繩手柄位於口袋中。確保型鍛球位於撕裂繩索的末端，沒有毛刺、銳邊和裂紋。檢查後，確保型鍛球存放在撕裂繩袋中。（見圖10-15。）