9. Minimally dimensioned drawing- non listed dimensions are controlled by cad solid model
90244881 and have a tolerance of +/-.005''
10. No flash allowed on lower rib,when visually inspected from 18'' with unaided eye under
normal lighting.
11. No cracks or tears permitted.
12. All ribs must be continuous and free of tears, cracks,voids,and particulate.
13. For each part, when visually inspected from 18'' with unaided eye under normal lighting,
any embedded specks-single or clustered-shall not appear larger than 0.1 SQ mm,and no more
than five (5) embedded specks of foreign material shall be larger than 0.05 SQ mm.
14. Cable/ Cable insulator must remain integral and functional after molding.
15. Cavity numbers to be identified on two-cavity mold as 01 & 02.(No cavity number indicates part from original mold.)
16. No mold release allowed. Part to be clean, free of any contamination such as grease or dirt.