Hi Nelly,
regarding the AURORA Fans I think you should provide more technical information – these are always very important for media as well as end-users.
You might check this page from Scythe for reference: http://www.scythe-eu.com/en/products/fans/glidestream-120-pwm-sc.html
Therefore additional information like the below ones would be very helpful:
- MTBF
- Bearing
- Noise level for dedicated speeds (e.g. 800rpm, 1000rpm, 1200 rpm, 1400rpm, 2000rpm)
- Air flow for dedicated speeds (see above) and also provide m³/h in correspondence to CFM
- Air pressure for dedicated speeds (see above)
- Power input according to speed rates
- Amperage according to speed rates
Again: Fans are becoming more and more important so you should give as much information as possible to have a smooth and successful entry in this market.