The leak has confirmed as customer

The leak has confirmed as customer complained. Yuatsu Bench test can detect the trouble, the leak occurred after 2 minutes test at 33.4° C . Leak tester ALMC & Waterleak can't detect the trouble. After Cutting the Part found porosity. However in that area has quality point check. Based on Data trouble at August 2018 found 1.20% from total production. The trouble can be detected by visual camera zoom at ALMC and Bubble check at Assy. So that this trouble are very small chance flow to customers.

結果 (繁體中文) 1:

洩漏已確認客戶的抱怨。Yuatsu台架試驗可以檢測故障，洩漏2分鐘後測試發生在33.4℃。檢漏儀ALMC＆Waterleak無法檢測的麻煩。切割後的部分發現孔隙度。但是在這方面有質量點檢查。基於數據麻煩2018八月從總產量發現1.20％。麻煩可以通過ALMC視覺相機變焦和氣泡檢查在總成進行檢測。所以，這個麻煩是非常小的機率流給客戶。

結果 (繁體中文) 2:

Mientras preparas la cena, seguiré con __anyone
___ más.

結果 (繁體中文) 3:

洩漏已被證實為顧客投訴。玉兔臺架試驗能檢測出故障，在33.4℃試驗2分鐘後發生洩漏。檢漏儀ALMC&Waterleak檢測不到故障。切割後發現零件有孔隙。但是在那個區域有質量點檢查。根據2018年8月的數據，總產量下降了1.20%。故障可以通過ALMC的攝像機變焦和Assy的氣泡檢查來檢測。所以這個麻煩是很小的機會流向客戶的。