This is not to discourage you in your efforts to replicate the many so called free energy magnet motors. The very first magnet motor according to the literature on the subject dates back some 700 years. Since that time there have been a very largte number of inventors, gadgeteers, hobbyists, DIYers have tried to build a magnet only motor and have not succeeded. The failure to build a magnet only motor is due essentially to lack of understanding of magnet fields. I have been involved in researching magnet only motors for some 40 years and have not come across a single working model. There have been and will be many patents awarded to inventors for magnet motors but all of these working designs use an electrical switching circuitry to neutralise the stationary magnets at the locking point to enable the rotor magnets to pass. Some designs have the stator magnets not merely being neutralised by reversed in polarity for more efficient action , The stator magnets may be permanent magnets or electromagnets. But none of these devices may be referred to as magnet only motors. I have seen just one single video of what appears to be a magnet only motor and the video shows this machine working. This does not mean that the machine is valid or actually real.. With appropriate knowledge and technical facilities, computers may produce just about any desired result. As you are interested in magnet only motors may i suggest you view this video. The origin or inventor or builder of this machine cannot be traced. Please do check this machine video out. There are two videos of the same machine. One video is titled Believe Machine and the other is titled The Believe Machine. I do think that this machine could be made to work if different shield material, dimensions and shapes culd be tried out. There are also a few patents awarded for the identical type machine using the same principle as the Believe Machine. I have unsuccessfulay been tryig to get someone in a first world country such as the US, UK, Germany ,France etc to research this Believe Machine or the patents referred to but no one appears to be interested in the least in what could be a practical design. I live in a third (or fourth) world country where even ordinary magnets cost the earth and of course except for just plain old iron in the form of sheets and flats there is nothing else available for shileding material such as Mumetal or Bismuth or composites of copper and iron etc. Please do check out the videos and the patents. You could most likely succeed i feel with the proper design , material and configuration of the shields. All the very best to you and thank you for you video and your comments on magnet motors.