9-148. Prior to inspecting the jump

9-148. Prior to inspecting the jumper, the jumpmaster moves behind the jumper and opens the main curved pin protector flap. The JM next disconnects the universal static line snap hook from the outer static line stow bar, insuring that the spring opening gate has spring tension. The jumpmaster removes all excess static line from the static line slack retainer band, and routes the universal static line modified over the shoulder corresponding with the door that the jumper is to exit.9-149. The jumpmaster secures the universal static line snap hook to the carrying handle of the MC-7 reserve parachute, with the spring opening gate facing towards the jumper. Finally, the JM removes the top and bottom tuck tabs on the reserve, taking care to ensure that both side tuck tabs remain secure. If the canopy release assembly cover plate is activated or the side tuck tabs become unsecured, the jumpmaster notifies a rigger. The jumpmaster may now begin the inspection. After the jumpmaster has completed the JMPI, these components will be placed back into jump configuration.

結果 (繁體中文) 1:

9-148. Prior to inspecting the jumper, the jumpmaster moves behind the jumper and opens the main curved pin protector flap. The JM next disconnects the universal static line snap hook from the outer static line stow bar, insuring that the spring opening gate has spring tension. The jumpmaster removes all excess static line from the static line slack retainer band, and routes the universal static line modified over the shoulder corresponding with the door that the jumper is to exit.

9-149. The jumpmaster secures the universal static line snap hook to the carrying handle of the MC-7 reserve parachute, with the spring opening gate facing towards the jumper. Finally, the JM removes the top



並在儲備底部掖標籤，同時注意保證兩側掖標籤保持安全。如果遮篷釋放組件蓋板被激活或側縫褶翼片成為不安全的，所述跳傘長通知裝配工。該跳傘現在可以開始檢查。在跳傘已完成JMPI後，這些組件將被放回跳配置。

結果 (繁體中文) 2:

ในทำนองเดียวกันในการศึกษานี้แสดงให้เห็นว่า
ที่มีความแตกต่างอย่างมีนัยสำคัญใน DM ทั้งหมดในชีวิตประจำวัน
การบริโภคในระหว่างการรักษา

結果 (繁體中文) 3:

9-148。在檢查跳線之前，jumpmaster會在跳線後面移動並打開主曲銷保護蓋。JM接著從外部靜態管路收起杆上斷開通用靜態管路卡鉤，確保彈簧開啟門具有彈簧張力。jumpmaster從靜態線路鬆弛固定帶中移除所有多餘的靜態線路，並將修改後的通用靜態線路佈線到與跳線要退出的門相對應的肩部。
9-149。jumpmaster將通用靜態繩卡鉤固定在MC-7備用降落傘的攜帶手柄上，彈簧開啟門朝向跳線。最後，JM删除了頂部
和底部折疊標籤保留，注意確保兩側折疊標籤保持安全。如果頂篷釋放總成蓋板被啟動或側折疊凸耳變得不安全，jumpmaster會通知起重工。jumpmaster現在可以開始檢查。在jumpmaster完成JMPI之後，這些組件將被放回jump配寘中。