The Telekinetic Enhancer is a valuable tool that will allow you to develop your telekinetic abilities by giving you a visible indication of your progress. Lt is a highly sensitive device that will react to the minute energy fields around the human body.
// To assemble the Telekinetic Enhancer remove the rotor and pin from the box and insert the pin up through the hole in the inside center of the cover, so that the point of the needle is going straight up through the Pewter base. Close the box Place the rotor on the needle so the indentation in the rotor rests on the point of the needle. The rotor should be able to spin freely and easily .Make sure that there are no drafts in the room that might move the rotor. Whenever you are practicing with this device, be careful not to breathe on the rotor or it may move from the heated air produced by your lungs.
// Once you start developing your telekinetic abilities and you use the device you will be convinced that the movement of the rotor is not easily explained by science. The rotor does not move by heat radiation from your hands or by air currents. It is not magnetism either because the rotor is made of aluminum.
// Step 1-The easiest way to learn to move the rotor is by cupping either hand around the rotor in a half circle and concentrate on turning it in the direction your fingers are pointing. The rotor should turn clockwise with your left hand and counter clockwise with your right hand. While using this device you must be relaxed and you should not be resting your elbows. Do not proceed until you have completely mastered this technique.
// Step "2-Although this methoStep "2-Although this method is more difficult it will teach you to direct the energy you learned to use in Step 1. Cup both your hands around the rotor being careful not to let your fingertips touch. Concentrate on making the rotor move clockwise or counter clockwise. Once you have the rotor moving in the right direction try reversing the movement. Again make sure you master this method before moving on. // Step 3 using only your index finger point it toward the rotor and without touching it try to make it follow your finger, as if you were pulling it towards you, in first one direction then the other. Try it with both hands to find out which finger is better. If you can not get the rotor to follow your finger, then try to make it move away as if you were pushing on it. Make sure that you master the above steps before going any further .// The above procedures teach you how to direct and control the energy fields around your body with your mind. if you have become adept at the techniques presented here then you are ready to increase your energy flow. You can do this by placing a glass over the rotor and box so that the glass is not touching the rotor. Use the smallest glass that will fit. The rotor should still spin freely inside the gass. Utilize the methods given previously to try and make the rotor move. This will be harder to do but be persistent in your efforts and you will succeed in raising your level of energy until it is high enough to affect the rotor even though the glass is over it. Remember that the energy flow is not constant and that you will have to relax between sessions Be persistent in your efforts and you will be succeStep "2-Although this method is more difficult it will teach you to direct the energy you learned to use in Step 1. Cup both your hands around the rotor being careful not to let your fingertips touch. Concentrate on making the rotor move clockwise or counter clockwise. Once you have the rotor moving in the right direction try reversing the movement. Again make sure you master this method before moving on.
// Step 3 using only your index finger point it toward the rotor and without touching it try to make it follow your finger, as if you were pulling it towards you, in first one direction then the other. Try it with both hands to find out which finger is better. If you can not get the rotor to follow your finger, then try to make it move away as if you were pushing on it. Make sure that you master the above steps before going any further .
// The above procedures teach you how to direct and control the energy fields around your body with your mind. if you have become adept at the techniques presented here then you are ready to increase your energy flow. You can do this by placing a glass over the rotor and box so that the glass is not touching the rotor. Use the smallest glass that will fit. The rotor should still spin freely inside the gass. Utilize the methods given previously to try and make the rotor move. This will be harder to do but be persistent in your efforts and you will succeed in raising your level of energy until it is high enough to affect the rotor even though the glass is over it. Remember that the energy flow is not constant and that you will have to relax between sessions Be persistent in your efforts and you will be successful.ssful.d is more difficult it will teach you to direct the energy you learned to use in Step 1. Cup both your hands around the rotor being careful not to let your fingertips touch. Concentrate on making the rotor move clockwise or counter clockwise. Once you have the rotor moving in the right direction try reversing the movement. Again make sure you master this method before moving on.
// Step 3 using only your index finger point it toward the rotor and without touching it try to make it follow your finger, as if you were pulling it towards you, in first one direction then the other. Try it with both hands to find out which finger is better. If you can not get the rotor to follow your finger, then try to make it move away as if you were pushing on it. Make sure that you master the above steps before going any further .
// The above procedures teach you how to direct and control the energy fields around your body with your mind. if you have become adept at the techniques presented here then you are ready to increase your energy flow. You can do this by placing a glass over the rotor and box so that the glass is not touching the rotor. Use the smallest glass that will fit. The rotor should still spin freely inside the gass. Utilize the methods given previously to try and make the rotor move. This will be harder to do but be persistent in your efforts and you will succeed in raising your level of energy until it is high enough to affect the rotor even though the glass is over it. Remember that the energy flow is not constant and that you will have to relax between sessions Be persistent in your efforts and you will be successful.
心靈的增強是進步的一個寶貴的工具,使您可以通過給你的你可視指示你心靈的培養。Lt 是高度敏感的設備,將應對人體周圍的微小的能量場。從框中的轉子和 pin 組裝心靈增強刪除和插入銷了從洞裡裡面中心的封面,因此它的針點通過白蠟基地將直線上升。關閉此框轉子上針的地方,所以在轉子壓痕休息的針尖。轉子應該能夠旋轉自由和輕鬆。請確保在可能移動轉子的房間裡沒有草稿。每當你在練習與此設備,小心不要在轉子上呼吸,或它可能會從你的肺部產生的熱空氣移動。一旦你開始培養你心靈的能力,您使用該設備,你一定會相信轉子的運動,不是用科學很容易解釋。從你的手或由氣流時,轉子不移動通過熱輻射。它不是磁性要麼因為轉子鋁制。步驟 1 最簡單的方法要學會移動的轉子是由拔罐要麼手繞半圈在轉子,集中精力把它在你的手指都指向的方向。轉子應與你的左手順時針和逆時針用你的右手。使用該設備時,你必須放鬆,你不應該休息你的肘部。不要進行,直到你已經完全掌握了這種技術。// Step "2-Although this methoStep "2-Although this method is more difficult it will teach you to direct the energy you learned to use in Step 1. Cup both your hands around the rotor being careful not to let your fingertips touch. Concentrate on making the rotor move clockwise or counter clockwise. Once you have the rotor moving in the right direction try reversing the movement. Again make sure you master this method before moving on. // Step 3 using only your index finger point it toward the rotor and without touching it try to make it follow your finger, as if you were pulling it towards you, in first one direction then the other. Try it with both hands to find out which finger is better. If you can not get the rotor to follow your finger, then try to make it move away as if you were pushing on it. Make sure that you master the above steps before going any further .// The above procedures teach you how to direct and control the energy fields around your body with your mind. if you have become adept at the techniques presented here then you are ready to increase your energy flow. You can do this by placing a glass over the rotor and box so that the glass is not touching the rotor. Use the smallest glass that will fit. The rotor should still spin freely inside the gass. Utilize the methods given previously to try and make the rotor move. This will be harder to do but be persistent in your efforts and you will succeed in raising your level of energy until it is high enough to affect the rotor even though the glass is over it. Remember that the energy flow is not constant and that you will have to relax between sessions Be persistent in your efforts and you will be succeStep "2-Although this method is more difficult it will teach you to direct the energy you learned to use in Step 1. Cup both your hands around the rotor being careful not to let your fingertips touch. Concentrate on making the rotor move clockwise or counter clockwise. Once you have the rotor moving in the right direction try reversing the movement. Again make sure you master this method before moving on. // Step 3 using only your index finger point it toward the rotor and without touching it try to make it follow your finger, as if you were pulling it towards you, in first one direction then the other. Try it with both hands to find out which finger is better. If you can not get the rotor to follow your finger, then try to make it move away as if you were pushing on it. Make sure that you master the above steps before going any further .// The above procedures teach you how to direct and control the energy fields around your body with your mind. if you have become adept at the techniques presented here then you are ready to increase your energy flow. You can do this by placing a glass over the rotor and box so that the glass is not touching the rotor. Use the smallest glass that will fit. The rotor should still spin freely inside the gass. Utilize the methods given previously to try and make the rotor move. This will be harder to do but be persistent in your efforts and you will succeed in raising your level of energy until it is high enough to affect the rotor even though the glass is over it. Remember that the energy flow is not constant and that you will have to relax between sessions Be persistent in your efforts and you will be successful.ssful.d is more difficult it will teach you to direct the energy you learned to use in Step 1. Cup both your hands around the rotor being careful not to let your fingertips touch. Concentrate on making the rotor move clockwise or counter clockwise. Once you have the rotor moving in the right direction try reversing the movement. Again make sure you master this method before moving on. // Step 3 using only your index finger point it toward the rotor and without touching it try to make it follow your finger, as if you were pulling it towards you, in first one direction then the other. Try it with both hands to find out which finger is better. If you can not get the rotor to follow your finger, then try to make it move away as if you were pushing on it. Make sure that you master the above steps before going any further .// The above procedures teach you how to direct and control the energy fields around your body with your mind. if you have become adept at the techniques presented here then you are ready to increase your energy flow. You can do this by placing a glass over the rotor and box so that the glass is not touching the rotor. Use the smallest glass that will fit. The rotor should still spin freely inside the gass. Utilize the methods given previously to try and make the rotor move. This will be harder to do but be persistent in your efforts and you will succeed in raising your level of energy until it is high enough to affect the rotor even though the glass is over it. Remember that the energy flow is not constant and that you will have to relax between sessions Be persistent in your efforts and you will be successful.
正在翻譯中..
![](//zhcntimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)